A corner flat is located in the end of the building: this is, part of its walls are not adjacent to the neighbours, however will be the outer partitions of the house.
There domikday.ru can be one flat in a corner apartment – it occupies the entire end of the house, it’s also called a corner apartment. Or 2 – the windows of a single forget the road, the second – the yard. Depends on the building program, the layout of the assumptions.
There is also a”different caste” – housing with walls in the expansion joints. These”gaps” between entrances are usually made in multi-story structures, the most important task of the unit – to split the deformation forces through the shrinkage of the building, in the event of crises. Pros and cons of corner flats at the joint are slightly different from the conventional ones with access to the road – we will pay particular attention to this topic in the last section.
Since the 2-3 sides of the space is outdoors, in winter it’s 3-5C colder, and in summer on the opposite – hotter. Especially if the conclusion of the house is heated by the sun. Sometimes, the difference reaches 10C – but such a difference is unacceptable, suggests a problem with the exterior the home – most probably have to contact the management business, asking (or forcing) to fulfill their immediate responsibilities, to spot the cracks shaped.
Corner flat in a brick house with thick walls is much more comfortable. Such risks are not subjected – the depth of the wall functions as a buffer, so not allowing overheating, overcooling.
When a room has just one wall united with the street, it generally has enough space heat to prevent freezing and condensation. However, if there are two outside walls, and they are adjacent – there’s a higher probability of freezing in the corner, the creation of condensation inside, and therefore – mould, fungus. Their spores not only spoil the look of the room, but also cause the appearance, complication of many serious ailments.
Important! The problems of corner location are compounded when the factors are associated – overly low temperatures from heating batteries along with dampness is guaranteed to result in moldy walls.